SkyTEM304 – The trend-setting SkyTEM pioneer
SkyTEM304 has been employed worldwide since 2004 for a wide range of applications including mineral, oil and gas exploration, geotechnical engineering solutions and most of the globally acclaimed SkyTEM water mapping projects. Like all SkyTEM technology the current in the coil turns off within a few microseconds. Bias free measurements begin at 7 µs. Combined with late time recordings out to 10 ms SkyTEM304 is the only system proven to deliver accurate data from the top few metres to depths of up to 350 m. Read further about SkyTEM304 here.
SkyTEM306 HP – Detailed near surface exploration
The SkyTEM306 HP (High Power) with six transmitter loop turns collects both near surface and deep data. The SkyTEM306 HP can be configured with SkyTEM’s breakthrough MultiMoment innovation for faster turn-on and turn-off, recorded by fully digital 3 channel receivers. Furthermore, SkyTEM306 HP can be configured in FAST mode, featuring an aerodynamically superior system reducing acquisition costs by flying at speeds of up to 150 km/h, providing an economically viable alternative to fixed wing, particularly when cost-effectiveness and data quality are crucial parameters. Read further about SkyTEM306 HP here.
Optimized for exploration at increased depth, the single-moment SkyTEM312 HP with 12 transmitter turns combines a small frame and high power to achieve depths of penetration obtained previously by much larger and heavier systems. Like SkyTEM306 HP, SkyTEM312 HP can be configured in FAST mode, as well as High Power (HP) with a peak moment up to 1,000,000 NIA. This high power system is optimized to provide an exceptional depth of investigation due to the high moment (HM) mode with high current and low base frequency of 12.5 Hz. Read further about SkyTEM312 HP here.